ALL Use & Care

The Modüla™ Sharpening System

Back

The Modüla™ Sharpening System: with three convenient diamond coated grit levels designed for effortless, consistent results without damaging your knife. It's ideally suited to both Modüla™ knives and most Western-style symmetrical blades, giving you pro-level results at home or anywhere.

Jump To:

Care & Maintenance Tips

  • Wipe Clean After Use: Use a dry cloth or soft brush to remove any residue.
  • No oil or water needed: Unlike whetstones, the diamond coating works best dry.
  • Store in a dry place: Such as a drawer when not mounted.
  • Rock, don't drag: Use a gentle rocking motion to sharpen your knives.
  • Sharpen + hone in one head: Apply firmer pressure deeper in the channel to engage the diamonds for sharpening, and lighter strokes at the smooth top section to hone.
How to Use Your Modüla™ Sharpening System

How It Works

The diamond coating removes metal quickly and precisely. The non-diamond upper section hones the edge to a mirror finish.

Three stages total:

Stage 1 (15°, 400 grit) – major sharpening/reconstruction (diamonds along the entire tine)

Stage 1 - 400 grit

Stage 2 (20°, 1000 grit) – edge shaping (diamonds located lower half of each tine)

Stage 2 - 1000 grit

Stage 3 (20°, 2000 fine grit) – final hone and polish (diamonds located lower half of each tine)

Stage 3 - 2000 grit

Step-by-Step Process: Existing Sharp Edge

  1. Start with 2000 grit for fine sharpening and honing.
  2. If your knife still isn't sharp enough, switch to the 1000 grit side. You'll feel a light "tooth" texture — that means your edge is ready.
  3. Leave it slightly toothy for a fine-serrated edge, ideal for everyday slicing.

Step-by-Step Process: Dull Edge

  1. Start with 400 grit for reconstruction.
  2. Switch to the 1000 grit to refine the edge.
  3. Switch to 2000 grit for a mirror polish, or leave slightly toothy.
Easy Mounting Your Sharpener Head

1. Permanent Mount: Screw down through the 4 heart-shaped holes or the 2 larger key holes into any wood surface.

2. Keyhole Screw Mounting: Use a single screw mounted in the corner of a cutting board. The keyhole slot on the sharpener head can be directly dropped over the screw head for quick and convenient sharpening.

3. Bamboo Case Mount: Utilize the bamboo case that houses your Solidteknics Modüla knives. The case features two screw heads mounted at the end where the Modüla sharpener heads can be attached directly via the 2 keyhole slots.

Watch our full instructional video: