⏳ Pre-Order
✨ New

35cm/6L Stainless Steel Wok + free Chef Spoon

$287.57 $230.06 Save 20%
⏳ Pre-Order
✨ New
35cm Lightweight Stainless Steel Wok
35cm/6L Stainless Steel Wok + free Chef Spoon
nöni works on all heat sources, from induction to gas to campfire
A close-up action shot of a person's hands holding a black frying pan over a countertop, tossing a colorful stir-fry of vegetables and meat. A ceramic bowl sits below, with a modern gray tiled wall in the background.
Customer review
Stainless Steel Cleaning and Care guide
A stainless steel wok with integrated handles sits on a black induction cooktop in a modern kitchen setting, with a fruit bowl blurred in the background.
35cm Lightweight Stainless Steel Wok
nöni works on all heat sources, from induction to gas to campfire
A close-up action shot of a person's hands holding a black frying pan over a countertop, tossing a colorful stir-fry of vegetables and meat. A ceramic bowl sits below, with a modern gray tiled wall in the background.
Customer review
Stainless Steel Cleaning and Care guide
A stainless steel wok with integrated handles sits on a black induction cooktop in a modern kitchen setting, with a fruit bowl blurred in the background.
⏳ Pre-Order
✨ New

35cm/6L Stainless Steel Wok + free Chef Spoon

$287.57 $230.06 Save 20%

A 35cm nöni wok that responds quick for high-heat stir-fries, Australian-made and dishwasher safe.

Or 4 payments of $57.52 with
Afterpay
WHY YOU’LL LOVE IT

✓ Naturally Non-Toxic — No synthetic coatings, no PFAS, PFOA or PTFE, and non-nickel. Nothing to leach, chip or peel — just solid stainless steel built to outlast you.

✓ 100% Australian Made — Wrought in Sydney from a single 3mm sheet of highly conductive non-nickel stainless steel. Designed, engineered and made right here in Australia.

✓ Seamless One-Piece Construction — Built from one sheet with no rivets, screws, welds or joins between pan and handle. No crevices to trap food, no failure points to loosen — just one smooth, hygienic piece.

✓ Non-Reactive & Effortless to Clean — Sears, sautés and deglazes beautifully, and won't react with tomato, wine or citrus the way seasoned iron can. Dishwasher-safe, no seasoning required, scrub it however you like.

✓ Multi-Heat Compatible — Fully induction-ready and at home on gas, electric, ovens, BBQs, pizza ovens or campfires. One pan for every heat source, indoors and out.

✓ Multi-Century Warranty — Built to be passed down, not thrown out. Backed by our multi-century warranty.

FEATURES & DIMENSIONS

  • Total Length: 53cm
  • Diameter: 35cm
  • Height of Bowl: 9cm
  • Cooking surface: 16cm
  • Weight: 3kg
  • Capacity: 6L

NON-TOXIC MATERIALS


One sheet of non-nickel stainless steel, wrought in Australia — no seasoning required. No coatings, no chemicals, no PFAS. That's it.


CARE & USE
  • Wash before use.
  • Preheat slowly. These pans are very conductive! Medium will be your new high.
  • Dishwasher friendly.
  • For full use and care, CLICK HERE.
COUNTRY OF ORIGIN

Australia

Details

35cm Stainless Steel Wok – nöni™ | Australian-Made Family-Size Induction Wok

The 35cm Stainless Steel Wok from the nöni™ range by Solidteknics is a family-sized, dual-handle stainless steel wok manufactured in Sydney, Australia. With a 6-litre capacity, flat bottom, and 3mm Lightning gauge, it’s built for full-family stir-fries, sautéing, searing and high-heat Asian-inspired cooking — and it’s one of the only flat-bottom stainless woks that runs cleanly on induction. It is a coating-free, PFAS-free, non-nickel stainless steel wok built to deliver multi-generational service.

Why a Flat-Bottom Stainless Wok

Traditional carbon steel and round-bottom woks don’t work on flat induction cooktops — the round base doesn’t make contact. The 35cm Lightning Wok solves that with a flat 16cm stove contact zone that mates with induction, while keeping the deep, generous bowl shape that makes wok cooking work. Stainless steel also removes the seasoning maintenance and rust risk that comes with carbon steel woks, while remaining fully compatible with acidic and saucy stir-fry components.

Material and Construction

The 35cm Lightning Wok is wrought from a single 2mm-thick sheet of non-nickel stainless steel. The alloy is non-nickel and contains no synthetic coatings — no PTFE, no PFOA, no PFAS — and no aluminium core. Because the wok is wrought in one piece, there are no rivets, screws, welds or joins between the cooking surface and the dual handles.

Heat Source Compatibility

  • Induction cooktops (flat-bottom design)
  • Gas burners (full circumference contact)
  • Electric coil and radiant ceramic
  • Halogen
  • Domestic and commercial ovens
  • BBQs and grills
  • Pizza ovens
  • Open campfires and outdoor flames

Dimensions and Capacity

  • Cooking diameter: 35cm
  • Stove contact surface: 16cm (flat base)
  • Bowl height: 9cm
  • Total length (dual handles): 53cm
  • Weight: 1.85kg
  • Capacity: 6 litres
  • Material thickness: 3mm

Dual handles balance the load — important at this capacity and necessary for the tossing motion of wok cooking.

Use Cases

The 35cm Wok is sized for family-scale wok work and beyond:

  • Stir-fries for four to six
  • Family-sized pad thai, kung pao, mapo tofu
  • Indo-Chinese and Korean dishes — bibimbap, bulgogi, jjajangmyeon
  • Indian curries and big-batch dahls
  • Pasta sauces and Bolognese
  • Searing large cuts of meat or whole fish
  • Risotto, paella and one-pot rice dishes
  • Deep-frying or shallow-frying at scale

The non-reactive stainless surface is fully compatible with acidic and liquid-based foods. It will not rust, will not strip seasoning, and will not impart metallic flavours.

Care and Cleaning

The 35cm Wok is dishwasher safe and requires no seasoning — unlike carbon steel woks, which require constant maintenance. The seamless one-piece design means there are no joins to trap food residue. Each pan is stamped with the month and year of manufacture.

What Differentiates This Wok

Most stainless woks are riveted, thin and nickel-bearing; most authentic woks are carbon steel that requires seasoning and rusts on contact with water. The 35cm nöni™ Wok replaces both with a single sheet of 3mm wrought non-nickel stainless steel, manufactured in Sydney, with a flat induction-compatible base, stamped with its month and year of production, and backed by a multi-century warranty. It is one of the only seamless, non-nickel, coating-free, induction-compatible family-sized stainless woks manufactured in Australia.