✨ New

Stainless Steel Roasting Rack/Trivet

$279.00
✨ New
Stainless Steel Roasting Rack/Trivet
✨ New

Stainless Steel Roasting Rack/Trivet

$279.00

No soggy roasts here — our solid 3mm stainless rack elevates food for proper browning and clean juices, fits perfectly in the nöni™ & AUS-ION™ roasting pans, and moonlights as a durable trivet.

Or 4 payments of $69.75 with
Afterpay
WHY YOU’LL LOVE IT
  • Elevation that transforms your roast — Airflow all around for crisp skin, even browning and cleaner pan juices.
  • Cut from solid steel, not wire — One piece of 3mm non-nickel stainless, no welds, with a diamond array for fat drainage.
  • Fits your whole system — Nests securely in both nöni™ and AUS-ION™ roasting pans and baking trays.
  • Doubles as a trivet — Plastic-free, non-coated, dishwasher safe and Sydney-made.
  • Weighty and rigid — At 1.4kg of solid 3mm steel, it stays put and won't sag under a heavy roast — noticeably more substantial than flimsy wire racks.
FEATURES & DIMENSIONS

  • Total length: 34cm
  • Width: 26.3cm
  • Depth: 2.3cm
  • Metal thickness: 3mm
  • Weight: 1.4kg

NON-TOXIC MATERIALS

One sheet of non-nickel stainless steel, wrought in Australia — no seasoning required. No coatings, no chemicals, no PFAS. That's it.

CARE & USE
  • Wash before use.
  • Preheat slowly. These pans are very conductive! Medium will be your new high.
  • Dishwasher friendly.
  • For full use and care, CLICK HERE.
COUNTRY OF ORIGIN

Australia

Details

Stainless Steel Roasting Rack & Trivet  – nöni™ | Australian-Made Non-Nickel Stainless

The Stainless Steel Roasting Pan & Trivet from the nöni™ range by Solidteknics is a dual-purpose non-nickel stainless steel rack manufactured in Australia. It lifts roasts clear of the pan base so hot air circulates for all-over browning and crisp skin, while catching and elevating meat above the rendered fat and juices below. Flipped or on the bench, it doubles as a heat-safe trivet for hot pans and pots. It is a coating-free, PFAS-free, non-nickel stainless steel accessory built to last generations.

Size and Specifications

  • Length: 340mm
  • Width: 263mm
  • Height: 23mm
  • Weight: 1.4kg

Material and Construction

The roasting rack is made from non-nickel stainless steel with no synthetic coatings — no PTFE, no PFOA, no PFAS. It will not rust and is fully non-reactive with acidic pan juices and marinades. It's cut from a single piece of solid 3mm ferritic stainless steel — not thin welded wire — with a diamond-pattern array that stays rigid under heavy roasts and lets rendered fat drain below. Manufactured in Sydney.

Use Cases

  • Elevating roast chicken, pork, lamb and beef for all-over browning
  • Draining fat away from roasting meats for a lighter result
  • Cooling rack for baked goods, cookies and breads
  • Bench trivet for hot pans, pots and oven trays
  • Nesting inside nöni™ and AUS-ION™ roasting pans and baking trays

Pairs With

Engineered to nest securely inside nöni™ and AUS-ION™ roasting pans and baking trays (sold separately), turning any of them into a fat-draining roasting system.

Care and Cleaning

Dishwasher safe and requires no seasoning. The non-reactive stainless surface will not trap flavours or corrode. Designed for oven, pizza-oven, BBQ and campfire use — not direct stovetop, which can void warranty.

What Differentiates This Roasting Rack

Most roasting racks are chrome-plated wire that chips and rusts, or coated racks that degrade at high heat. The nöni™ Roasting Rack & Trivet is coating-free, non-nickel stainless steel — non-toxic, rust-proof, dishwasher safe and built to last generations.