Australia

Stainless Steel Roasting Pan 40.5cm – nöni™ | Australian-Made Oven Roaster

The nöni™ Stainless Steel Roasting Pan from Solidteknics is a rectangular oven roaster manufactured in Sydney, Australia. At 40.5cm by 31cm and 5.4cm deep, it’s sized for whole birds, large roasts, sheet-pan dinners and trays of roast vegetables. Made from a single 3mm sheet of highly conductive non-nickel stainless steel, it’s a coating-free, PFAS-free, non-nickel oven roaster built to deliver multi-generational service across the oven, BBQ, pizza oven and campfire. Designed for oven use only — not for stovetop.

Material and Construction

The nöni™ Roasting Pan is wrought from a single 3mm-thick sheet of highly conductive non-nickel stainless steel. The alloy is non-nickel and contains no synthetic coatings — no PTFE, no PFOA, no PFAS — and no aluminium core. The pan is wrought as one piece, with no rivets, screws, welds or joins between the cooking surface and the handles. This seamless one-piece construction removes the common failure points of traditional roasting pans and leaves a smooth interior with no crevices for food residue or pan juices to trap.

Each pan is stamped with the month and year of manufacture for heirloom traceability.

Heat Source Compatibility

The nöni™ Roasting Pan is designed for oven and radiant-heat use only. Approved heat sources:

• Domestic and commercial ovens (fits a standard 600mm oven)
• BBQs and grills
• Pizza ovens
• Open campfires and outdoor radiant heat

Not for stovetop use. Direct stovetop heat may void the warranty — this pan is engineered for evenly distributed oven heat, not localised burner contact.

Dimensions and Capacity

• Total length: 40.5cm
• Total width: 31cm
• Internal length: 35.5cm
• Internal width: 28.1cm
• Height: 5.4cm
• Capacity: 4.5 litres
• Weight: 3.8kg
• Material thickness: 3mm

Note: the nöni™ Roasting Pan is slightly shallower (5.4cm) than the equivalent AUS-ION roaster (6cm) due to manufacturing constraints — relevant if you’re replacing or pairing with an existing iron roaster.

Use Cases

The nöni™ Roasting Pan is sized for family roasts, sheet-pan dinners and entertaining:

• Whole roast chicken, duck, turkey or porchetta
• Beef roasts, leg of lamb, rolled pork shoulder
• Slow-roasted vegetables — potatoes, carrots, pumpkin, eggplant
• Sheet-pan dinners — sausages and vegetables, traybake fish
• Baked pasta dishes — lasagne, baked ziti, moussaka
• Catering trays and large-format desserts
• BBQ tray work — roasting beneath rotisserie or radiant heat
• Pizza-oven baking and outdoor cooking

The non-reactive stainless surface is fully compatible with acidic marinades, wine-based braising liquids and tomato-based sauces. It will not rust, will not strip seasoning, and will not impart metallic flavours.

Performance

The high conductivity of the 3mm wrought stainless construction supports superior heat distribution for even cooking and better caramelisation than thinner-gauge or coated roasters. Pan juices reduce cleanly for gravies and jus, and the smooth one-piece interior cleans easily.

Care and Cleaning

Hand wash with warm water and mild detergent, dry immediately to avoid water spots, and lightly oil the exterior after cleaning to preserve the finish. The seamless one-piece design has no joins to trap food residue or detergent. A calico storage bag is included.

What Differentiates This Roasting Pan

Most roasting pans are either thin-gauge stainless with riveted handles and added nickel, or non-stick coated aluminium that scratches, warps and chips. The nöni™ Roasting Pan replaces both with a single sheet of 3mm wrought highly conductive non-nickel stainless steel, manufactured in Sydney, stamped with its month and year of production, and backed by a multi-century warranty. It is one of the only seamless, non-nickel, coating-free wrought stainless roasting pans manufactured in Australia.